Supporting Partner of the
PC8214X Cabin Air Filter | Fits 2015-20 Ford F-150, 2017-20 F-250 Super Duty, F-350 Super Duty, 2018-20 Ford Expedition, 2017-20 F-450 Super Duty, 2019-20 Lincoln Navigator
Keeping dust and pollution out of the cabin of your Ford is essential to a clean and healthy ride--you want to keep your truck, and your lungs, free from exhaust, allergens, and other detritus from the road. This is especially important with these filters, as they’re compatible with heavy-duty Ford trucks that are more than likely going to end up on dirt roads.
The PureFlow Cabin Air Filter PC8214X has four stages of filtration--PureFlow by Premium Guard--to make sure that your cabin stays healthy and the air is clear and crisp.
1st Stage
The first stage of the PureFlow by Premium Guard is the particulate filtration media. This captures and eliminates particulate matter such as dust and pollen--all of the bigger stuff that you don’t want blowing in through the vents. There’s nothing as frustrating on a dirt road than breathing in all the dust from the truck in front of you.
This is more than just a filter that blocks particulates through a fine mesh. Using an electrostatically charged system, this filter attracts the particulate matter to it like a magnet and holds it there so that it doesn’t even want to get sucked up into your cabin air. And your filter can do all this while providing high-flow and high-capacity air circulation.
2nd and 3rd Stage
The second and third layer of the PureFlow by Premium Guard is an activated charcoal layer, just like the type you find in water filters to make the water crystal clear and pure. This activated charcoal traps mold and harmful gasses--like the exhaust of the car in front of you, the carbon monoxide, sulfur dioxide, and more.
But more than just activated charcoal, these layers have a baking soda layer--yes, doing what baking soda does best: sucking up bad smells. This layer will absorb the bad smells from mold and smoke as well as street-level pollution.
4th Stage
The final stage of the PureFlow by Premium Guard is one last guard against mold. As mold spores can be so detrimental to your health, and can be sucked up into a car’s cabin so easily, we give an added level of protection to keep them out with special fibers that act as a barrier to the mold.
- Fits 2015-20 Ford F-150, 2017-20 F-250 Super Duty, F-350 Super Duty, 2018-20 Ford Expedition, 2017-20 F-450 Super Duty, 2019-20 Lincoln Navigator
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Replacing this cabin air filter on your own is an easy process that hardly takes any time at all. Simply follow the steps below:
- Remove the glove box
- Remove the five hush panel fasteners and remove the hush panel
- Disengage the two retaining tabs that secure the cabin air filter cover to the passenger side of the HVAC air distribution housing and remove the cover
- Remove the cabin air filter by pulling it straight out of the housing
- Vacuum out the housing to remove all dust and debris
- Install the new cabin air filter, directly with the arrow on the filter pointing toward the floor.
- Replace the cover and engage the retaining tabs
- Replace the hush panel
- Replace the glove box
This entire process can be done in less than ten minutes.
Supporting Partner of the
Keeping dust and pollution out of the cabin of your Ford is essential to a clean and healthy ride--you want to keep your truck, and your lungs, free from exhaust, allergens, and other detritus from the road. This is especially important with these filters, as they’re compatible with heavy-duty Ford trucks that are more than likely going to end up on dirt roads.
The PureFlow Cabin Air Filter PC8214X has four stages of filtration--PureFlow by Premium Guard--to make sure that your cabin stays healthy and the air is clear and crisp.
1st Stage
The first stage of the PureFlow by Premium Guard is the particulate filtration media. This captures and eliminates particulate matter such as dust and pollen--all of the bigger stuff that you don’t want blowing in through the vents. There’s nothing as frustrating on a dirt road than breathing in all the dust from the truck in front of you.
This is more than just a filter that blocks particulates through a fine mesh. Using an electrostatically charged system, this filter attracts the particulate matter to it like a magnet and holds it there so that it doesn’t even want to get sucked up into your cabin air. And your filter can do all this while providing high-flow and high-capacity air circulation.
2nd and 3rd Stage
The second and third layer of the PureFlow by Premium Guard is an activated charcoal layer, just like the type you find in water filters to make the water crystal clear and pure. This activated charcoal traps mold and harmful gasses--like the exhaust of the car in front of you, the carbon monoxide, sulfur dioxide, and more.
But more than just activated charcoal, these layers have a baking soda layer--yes, doing what baking soda does best: sucking up bad smells. This layer will absorb the bad smells from mold and smoke as well as street-level pollution.
4th Stage
The final stage of the PureFlow by Premium Guard is one last guard against mold. As mold spores can be so detrimental to your health, and can be sucked up into a car’s cabin so easily, we give an added level of protection to keep them out with special fibers that act as a barrier to the mold.
- Fits 2015-20 Ford F-150, 2017-20 F-250 Super Duty, F-350 Super Duty, 2018-20 Ford Expedition, 2017-20 F-450 Super Duty, 2019-20 Lincoln Navigator
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Installation Instructions
Installation Instructions
Product Information
Technical Details |
Complete Vehicles Fitment List |
---|---|
Brand: | Premium Guard |
Weight: | 0.85 |
Dimensions: | 10.43 x 8.27 x 1.77 |
Part number: | PC8214X |
Oem part number: | FL3Z19N619A JL7Z19N619A FL3Z-19N619-A |