Supporting Partner of the
PC5667X Cabin Air Filter | Fits 2004-2020 various models of Jaguar, Land Rover, Lexus, Pontiac, Scion, Subaru, Toyota
The PC5667X Cabin Air Filter uses a 4-stage Premium Guard with four filtration levels to keep the air in the cabin clean. The first stage is for particulate filtration: this keeps out the dust, debris, pollen, and other particulate matter that you could easily suck into your vehicle and cause breathing problems, allergies, and bad smells. On top of that, these particulates clog up your heating and cooling systems, making them work at suboptimal health. A good thing to watch out for is If you feel your HVAC is taking slower than normal to heat or cool, it’s a good bet that your filter is clogged and needs to be replaced.
The second and third stage are activated charcoal layers that remove most harmful gasses, particularly carbon monoxide and sulfur dioxide. This is important if you’re going to be stuck in traffic and the guy in front of you is belching smoke out of his exhaust pipe. For that matter, it’s good for any kind of city driving where you’re going to be sucking in lots of pollution. If you commute and are ever stuck in traffic, you’re going to want a clean air filter. This layer is combined with baking soda to contain bad smells usually resulting from mold or smoke.
The final stage uses special fibers to trap mold. This is a fourth barrier to ensure that you have good health over the course of your drive: the first was to watch out for breathing conditions, the second and third are to watch out for toxic chemicals, and this final one is to block those mold spores that can wreak havoc on your body if inhaled.
- Fits 2004-2020 various models of Jaguar, Land Rover, Lexus, Pontiac, Scion, Subaru, Toyota
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Replacing this cabin air filter on your own is an easy process that hardly takes any time at all. Simply follow the steps below:
- Remove the glove box
- Remove the five hush panel fasteners and remove the hush panel
- Disengage the two retaining tabs that secure the cabin air filter cover to the passenger side of the HVAC air distribution housing and remove the cover
- Remove the cabin air filter by pulling it straight out of the housing
- Vacuum out the housing to remove all dust and debris
- Install the new cabin air filter, directly with the arrow on the filter pointing toward the floor.
- Replace the cover and engage the retaining tabs
- Replace the hush panel
- Replace the glove box
This entire process can be done in less than ten minutes.
Supporting Partner of the
The PC5667X Cabin Air Filter uses a 4-stage Premium Guard with four filtration levels to keep the air in the cabin clean. The first stage is for particulate filtration: this keeps out the dust, debris, pollen, and other particulate matter that you could easily suck into your vehicle and cause breathing problems, allergies, and bad smells. On top of that, these particulates clog up your heating and cooling systems, making them work at suboptimal health. A good thing to watch out for is If you feel your HVAC is taking slower than normal to heat or cool, it’s a good bet that your filter is clogged and needs to be replaced.
The second and third stage are activated charcoal layers that remove most harmful gasses, particularly carbon monoxide and sulfur dioxide. This is important if you’re going to be stuck in traffic and the guy in front of you is belching smoke out of his exhaust pipe. For that matter, it’s good for any kind of city driving where you’re going to be sucking in lots of pollution. If you commute and are ever stuck in traffic, you’re going to want a clean air filter. This layer is combined with baking soda to contain bad smells usually resulting from mold or smoke.
The final stage uses special fibers to trap mold. This is a fourth barrier to ensure that you have good health over the course of your drive: the first was to watch out for breathing conditions, the second and third are to watch out for toxic chemicals, and this final one is to block those mold spores that can wreak havoc on your body if inhaled.
- Fits 2004-2020 various models of Jaguar, Land Rover, Lexus, Pontiac, Scion, Subaru, Toyota
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Installation Instructions
Installation Instructions
Product Information
Technical Details |
Complete Vehicles Fitment List |
---|---|
Brand: | Premium Guard |
Weight: | 0.53 |
Dimensions: | 8.86 x 8.27 x 1.38 |
Part number: | PC5667X |
Oem part number: | 87139-02090 87139-50100 87139-52020 LR036369 87139-07010 C2S52338 87139-YZZ08 87139-50100 87139YZZ16 87139-52040 17801-YZZ06 87139-YZZ16 87139-50070 87139-30020 87139YZZ16 871390D070 87139-26010 87139-07020 87139-30040 87139-06050 8713926010 72880AJ00A 19184673 87139-50060 87139-30070 87139-0D070 87139YZZ16 72880AL00A |