Supporting Partner of the
PC5519X Cabin Air Filter | Fits 2003-20 Honda Accord, 2006-15 Civic, 2007-16 CR-V, 2005-17 Odyssey, 2009-20 Pilot, 2007-18 Acura RDX, 2007-20 MDX, 2006-20 Ridgeline, 2004-14
The PC5519X Cabin Air Filter uses a 4 stage approach to filtering the air in the cabin. The first stage is for particulate filtration: this is what keeps out the dust, debris, pollen, and other particulate matter that you could easily suck into your vehicle and cause breathing problems, allergies, and bad smells. Plus, these particulates are what clog up your HVAC system, making the heater and air conditioner work at less than optimum health. If you feel your HVAC is taking slower than normal to heat or cool, it’s a good bet that your filter is packed and needs to be replaced.
The second and third stage are activated charcoal layers that remove most harmful gasses, particularly carbon monoxide and sulfur dioxide. This is important if you’re going to be stuck in traffic and the guy in front of you is belching smoke out of his exhaust pipe. For that matter, it’s good for any kind of city driving where you’re going to be sucking in lots of pollution. If you commute and are ever stuck in traffic, you’re going to want a clean air filter.
The final stage uses special fibers to trap mold. This is a fourth barrier to ensure that you have good health over the course of your drive: the first was to watch out for breathing conditions, the second and third are to watch out for toxic chemicals, and this final one is to block those mold spores that can wreak havoc on your body if inhaled.
- Fits 2003-20 Honda Accord, 2006-15 Civic, 2007-16 CR-V, 2005-17 Odyssey, 2009-20 Pilot, 2007-18 Acura RDX, 2007-20 MDX, 2006-20 Ridgeline, 2004-14
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Replacing this cabin air filter on your own is an easy process that hardly takes any time at all. Simply follow the steps below:
- Remove the glove box
- Remove the five hush panel fasteners and remove the hush panel
- Disengage the two retaining tabs that secure the cabin air filter cover to the passenger side of the HVAC air distribution housing and remove the cover
- Remove the cabin air filter by pulling it straight out of the housing
- Vacuum out the housing to remove all dust and debris
- Install the new cabin air filter, directly with the arrow on the filter pointing toward the floor.
- Replace the cover and engage the retaining tabs
- Replace the hush panel
- Replace the glove box
This entire process can be done in less than ten minutes.
Supporting Partner of the
The PC5519X Cabin Air Filter uses a 4 stage approach to filtering the air in the cabin. The first stage is for particulate filtration: this is what keeps out the dust, debris, pollen, and other particulate matter that you could easily suck into your vehicle and cause breathing problems, allergies, and bad smells. Plus, these particulates are what clog up your HVAC system, making the heater and air conditioner work at less than optimum health. If you feel your HVAC is taking slower than normal to heat or cool, it’s a good bet that your filter is packed and needs to be replaced.
The second and third stage are activated charcoal layers that remove most harmful gasses, particularly carbon monoxide and sulfur dioxide. This is important if you’re going to be stuck in traffic and the guy in front of you is belching smoke out of his exhaust pipe. For that matter, it’s good for any kind of city driving where you’re going to be sucking in lots of pollution. If you commute and are ever stuck in traffic, you’re going to want a clean air filter.
The final stage uses special fibers to trap mold. This is a fourth barrier to ensure that you have good health over the course of your drive: the first was to watch out for breathing conditions, the second and third are to watch out for toxic chemicals, and this final one is to block those mold spores that can wreak havoc on your body if inhaled.
- Fits 2003-20 Honda Accord, 2006-15 Civic, 2007-16 CR-V, 2005-17 Odyssey, 2009-20 Pilot, 2007-18 Acura RDX, 2007-20 MDX, 2006-20 Ridgeline, 2004-14
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Installation Instructions
Installation Instructions
Product Information
Technical Details |
Complete Vehicles Fitment List |
---|---|
Brand: | Premium Guard |
Weight: | 0.64 |
Dimensions: | 9.45 x 9.06 x 1.38 |
Part number: | PC5519X |
Oem part number: | AQ1058 80292-SEC-A01 CAF1781 80291-SEP-H01 F4815 80292-SDA-407 80292-TV1-E01 80292-TZ5-A41 CAF16P 80292-SDC-A01 PAQ1058 80292-SEC-A01 CAF1781 80292-TZ3-A41 80292-SDA-406 80292-SWA-405 80292-SDA-A01 80292-SHJ-A42 AQ1058C 80292-SHJ-A41 CAF1781 80290-SWA-003 80292-SWA-003 80292-SWA-A01 80292-SDA-407 80292-SDC-A01 AQ1058C CAF16C 80292-T0G-A01 F4815C 80292-SDA-A01 F5302 80290-SEC-A01 |