Supporting Partner of the
PC5245X Cabin Air Filter | Fits 2005-09 Buick Allure, 1997-05 Century, 2005-09 LaCrosse, 1997-04 Regal, 2000-14 Chevrolet Impala, 2014-16 Impala Limited, 2000-01 Lumina, 200
- Fits 2005-09 Buick Allure, 1997-05 Century, 2005-09 LaCrosse, 1997-04 Regal, 2000-14 Chevrolet Impala, 2014-16 Impala Limited, 2000-01 Lumina, 200
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Replacing this cabin air filter on your own is an easy process that hardly takes any time at all. Simply follow the steps below:
- Remove the glove box
- Remove the five hush panel fasteners and remove the hush panel
- Disengage the two retaining tabs that secure the cabin air filter cover to the passenger side of the HVAC air distribution housing and remove the cover
- Remove the cabin air filter by pulling it straight out of the housing
- Vacuum out the housing to remove all dust and debris
- Install the new cabin air filter, directly with the arrow on the filter pointing toward the floor.
- Replace the cover and engage the retaining tabs
- Replace the hush panel
- Replace the glove box
This entire process can be done in less than ten minutes.
Supporting Partner of the
- Fits 2005-09 Buick Allure, 1997-05 Century, 2005-09 LaCrosse, 1997-04 Regal, 2000-14 Chevrolet Impala, 2014-16 Impala Limited, 2000-01 Lumina, 200
- PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
- 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
- 4th Stage filtration that employs special fibers acting as barrier to trap mold.
Installation Instructions
Installation Instructions
Product Information
Technical Details |
Complete Vehicles Fitment List |
---|---|
Brand: | Premium Guard |
Weight: | 0.73 |
Dimensions: | 11.61 x 7.68 x 1.57 |
Part number: | PC5245X |
Oem part number: | 10446783 52469891 10261703 15284938 10340216 22892907 10406026 25958653 |