PC4302X Cabin Air Filter | Fits 2011-18 Jeep Wrangler; 2018 Jeep Wrangler JK

• PureFlow by Premium Guard with 4 filtration levels - 1st Stage PureFlow particulate filtration media - captures and eliminates particulate matter such as dust and pollen. Electrostatically charged to attract and lock fine particles of dust while allowing high-flow and high-capacity.
• 2nd & 3rd Stage Activated Charcoal layer that traps and mold harmful gases - e.g. carbon monoxide, sulfur dioxide. This layer is combined with Baking soda to absorb bad smells resulting from mold and smoke.
• 4th Stage filtration that employs special fibers acting as barrier to trap mold.

Replacing this cabin air filter on your own is an easy process that hardly takes any time at all. Simply follow the steps below:

• Remove the glove box
• Remove the five hush panel fasteners and remove the hush panel
• Disengage the two retaining tabs that secure the cabin air filter cover to the passenger side of the HVAC air distribution housing and remove the cover
• Remove the cabin air filter by pulling it straight out of the housing
• Vacuum out the housing to remove all dust and debris
• Install the new cabin air filter, directly with the arrow on the filter pointing toward the floor.
• Replace the cover and engage the retaining tabs
• Replace the hush panel
• Replace the glove box

This entire process can be done in less than ten minutes.